Stainless steel rivet nut columns can be divided into manual stainless steel rivet nut columns, pneumatic stainless steel rivet nut columns and electric stainless steel rivet nut columns;

Stainless steel rivet nut posts are literally used as tools for stainless steel rivet nut posts. Some stainless steel rivet nut posts can also rivet bolts and different types of rivets; The application methods of different stainless steel rivet nut brands are different, and it is only necessary to correctly use and protect them according to their application instructions. According to the standard of stainless steel rivet nut column and the replacement of gun head with raw materials, we can leave the stainless steel rivet nut column riveted differently.

Precautions for stainless steel rivet nut column are as follows:

1. Before using the stainless steel rivet nut column, add pneumatic oil to check whether the air pipe and the air port are leaking.
2. Check whether the stainless steel rivet nut stud screw is correctly equipped and matched, and the wear degree,
3. Frequently check whether the connecting parts are firmly connected.
4. The stainless steel rivet nut column needs to be replaced and filled with lubricating grease if it has been used for a long time.
5. Any worn accessories shall be replaced in time. It is prohibited to replace or add accessories other than the tool gun to the gun body.

Stainless steel rivet nut column is a kind of stainless steel rivet nut column. It is mainly used on sheet metal or sheet metal. It is circular in shape, with embossed teeth and guide grooves at one end. The skill requirements for pressing stainless steel rivet nuts are as follows:
1. Some of the stainless steel rivet nut columns of this type are made of free cutting iron, which is treated after heat treatment, while some are made of free cutting stainless steel, which is not treated on the surface.

2. The hardness of the low-carbon steel plate of the stainless steel rivet nut column must be less than 70RB, and the hardness of the stainless steel plate must be less than 80RB.

3. The stainless steel rivet nut column is mainly applicable to plates of various thicknesses. The small thickness of Z is 0.8mm. It is necessary to determine the tail number Z corresponding to dimension A according to the plate thickness and nut standard when using.

4. It shall be accurately controlled according to the aperture dimension. It shall be processed according to the service dimension of 0 -+0.075mm. It is better to punch holes in Z, and the nut shall generally be installed from the "disconnection" surface of the plate. The process of the device is usually completed by "pressing riveting", and it must not be knocked in.



Detai Shenglong, the manufacturer of stainless steel rivet nut column, details the production process of stainless steel rivet nut column

The production process of stainless steel press rivet nut column is roughly the same as that of other screws, except that the screws are made with a screw driver, while the nuts are made with a nut driver. Now Shenzhen Detai Shenglong, a professional manufacturer of stainless steel rivet nuts in Guangdong, will explain the production process of stainless steel rivet nuts:

1. Acquisition of materials
First, we need to decompress the information and raw materials of stainless steel rivet nut column, so that we can use the information and raw materials to produce, and then prepare to purchase the manufacturing information of stainless steel rivet nut column.

2. Determination of standards

Determine the standard and type of constant pressure stainless steel rivet nut column, and look at its size and length. This is really how big the screw wire is.

3. Selection of moulds

After the first two steps are completed, we need to see if it is a commonly used stainless steel rivet nut column. If it is, there must be a corresponding mold in the factory. If not, it is non-standard, then we have to order molds.

4. Composition of appearance
After everything is ready for production, the shape of stainless steel rivet nut column, that is, the appearance, must be made with the nut machine.

5. Treatment of tapping
After the pier is knocked out, the machine for tapping the nut teeth shall be used for tapping.

6. Electroplating treatment
After the thread is tapped, the stainless steel press rivet nut column does not need electroplating, but only needs to be cleaned. If want electroplate other colorful, must get professional electroplate manufacturer to undertake electroplate processing.