Stainless steel rivet nut equipment:
The equipment of stainless steel rivet nut is discussed. If the equipment method is incorrect, the appearance of weak rivet after rivet pressing will appear. Because the stainless steel rivet nut will be subjected to uneven force with this equipment method, which will seriously affect the riveting effect. It looks like the stainless steel rivet nut is pressed in, but in fact, the spline root of the stainless steel rivet nut is not riveted with the plate, so it must not be riveted firmly. Stainless steel rivet nuts must be equipped with special equipment, or press and stamping equipment.

S series stainless steel rivet nuts are made of free cutting steel (12L14 or 1215), which are subject to environmental protection electroplating after heat treatment. CLS series stainless steel rivet nuts are made of SUS303 free cutting stainless steel, with no surface treatment. The hardness of low carbon steel plate must be less than 70RB, and that of stainless steel plate must be less than 80RB. It is applicable to plates of various thicknesses, with a small thickness of 0.8mm. It is necessary to determine the tail number Z corresponding to specification A according to the plate thickness and nut specification when using. Users can select samples and order according to the tail number in the table according to the plate thickness; It shall be accurately controlled according to the aperture specification, and processed according to the tolerance specification of 0+0.08mm. In case of punching, the nut shall generally be from the "disconnection" surface of the plate. The following are the drawings and parameters of stainless steel rivet nuts supplied by our company.

The stainless steel rivet nut column is a fastener with internal thread according to its external shape. The screwing in direction of rivet screws is the exposed direction of such fasteners. Its types are: grounding stud; Quiescent stud; Expansion rivet stud; Kneading studs, reaming studs, double headed studs, and general studs.

Technical guide for application of stainless steel rivet nuts:

1. S series stainless steel rivet nuts are made of free cutting iron, which is treated after heat treatment. CLS series stainless steel rivet nuts are made of free cutting stainless steel, with no surface treatment.

2. The hardness of low-carbon steel plate must be less than 70RB, and that of stainless steel plate must be less than 80RB.

3. It is applicable to plates of various thicknesses, with a small thickness of 0.8mm. The tail number Z of dimension A can only be determined according to the plate thickness and nut specification when using. The user selects samples and orders according to the plate thickness and the tail number in the table.

4. According to the aperture size, it shall be accurately controlled and processed according to the tolerance size of 0 -+0.075mm. If it is good to punch, the nut shall generally be from the“